Arri WCU-4 Antenna Adapter 3D Printer Model
The file 'Arri WCU-4 Antenna Adapter 3D Printer Model' is (3mf,stl) file type, size is 311.5KB.
The file 'Arri WCU-4 Antenna Adapter 3D Printer Model' is (3mf,stl) file type, size is 311.5KB.
A simple cover for the antenna compartment of the WCU-4 so that you can remove the stock antenna and replace it with an adapter of your choice.
The WCU-4 internal antenna connector is MMCX Female. I found the shortest possible MMCX Male to RP-SMA Female cable I could on Amazon but choose whatever version you prefer. Just be aware of the differences between RP-SMA vs SMA and the Female vs Male variants of both.
And if I remember correctly, there are two MMCX connectors inside the WCU4. Take note of which the stock antenna is using as the other one does not work or appear to have a use for us.
Print upright using PETG. Supports most likely not needed.
.STL, .STEP, .3MF and .F3D files included. Don't judge my design process. This one was put together quickly before a travel job and could probably use some cleanup, hence WIP status.
| Arri_WCU4-AntennaAdapter_20240803.3mf | 132.3KB | |
| Arri_WCU4-AntennaAdapter_20240803.stl | 578.6KB |
