Update 5/31/2024:
Added a Bluth Stair Car 50 percent Size.zip folder if you'd like to print a smaller version of this with beefier letters on the logo for nicer printing.
This is the stair car from the great show Arrested Development. All the STL files print without supports. Most of the pieces snap together, some are glued. The scale of the STLs are about the maximum print volume for the MB Replicator 2.
The logos were printed by changing the filament during the print. Start with white, then change to red, then finally blue.
| black.stl | 957.7KB | |
| blue_01.stl | 624.4KB | |
| blue_02.stl | 8.7KB | |
| Bluth_Stair_Car_50_Percent_Size.zip | 3.3MB | |
| grey.stl | 635.4KB | |
| logos_back.stl | 1.2MB | |
| logos_top.stl | 1.2MB | |
| red.stl | 11.4KB | |
| stair_car_individual_pieces.zip | 3.4MB | |
| white_01.stl | 330.9KB | |
| white_02.stl | 6.1MB | |
| white_03.stl | 297.4KB | |
| white_04.stl | 188.7KB | |
| white_05.stl | 1.4MB | |
| white_06.stl | 297.4KB |
