Arquitens Light Cruiser – More Detail – X-Wing Scale 3D Printer Model
The file 'Arquitens Light Cruiser – More Detail – X-Wing Scale 3D Printer Model' is (stl) file type, size is 137.9MB.
The file 'Arquitens Light Cruiser – More Detail – X-Wing Scale 3D Printer Model' is (stl) file type, size is 137.9MB.
Added some extra detail. Quite a rough job, was mostly learning how to greeble things.
Resized and split into chunks for X-Wing scale (went with 2x the Tantive IV/Raider length)
Should come out around 700mm long.
If you have an Ender 3 or similar sized printer scaling by 85% will fit the pieces on at 45 degrees and still give a respectable 600mm overall length.
Complete model also provided.
| Arquitens-Aft.stl | 23.3MB | |
| Arquitens-Bridge.stl | 2.7MB | |
| Arquitens-Engines.stl | 16.3MB | |
| Arquitens-Fore.stl | 24.7MB | |
| Arquitens-Mid.stl | 16.8MB | |
| Arquitens-Nose.stl | 14.8MB | |
| Arquitens.stl | 95.4MB |
