I made a decoration for Halloween, arms coming out of the ground with hangers
two small size (for a fun decoration) and large 'for a realistic decoration
small arms measure 5.2 cm wide 14.3 cm long and 7 mm thick, printing time 2 h14 min
the supports of the small arms measure 0.4 cm of width 8.9 cm of length and 4 mm
the square support measures 2.5 by 2.5 cm and 4mm thick, printing time 43 min (for both supports)
the large arms measure 8.1 cm in width 22.3 cm in length and 10 mm in thickness, printing time 6 h 16 min (for both arms)
the supports of the big arms measure 0.7 cm of width 14 cm of length and 5.3 mm
square support measures 3.9 by 3.9 cm and 8.8 mm thick, printing time 1h 57min (for both supports)
I wish you a nice Halloween decoration and happy birthday to all
3D PRINTING PARAMETERS
filling rate 30%
80% printing speed
pla 215 ° (on the photo pla natural)
thicknesses above 0.2
layer thickness 0.2
shell thickness 0.8
no support
| bras.stl |
| bras_grand.stl |
| support_bras.stl |
| support_bras_grand.stl |
