Arduino-powered Headdress V2 / Bike Helmet (inspired By Jamiroquai Automaton Hat) 3D Printer Model
The file 'Arduino-powered Headdress V2 / Bike Helmet (inspired By Jamiroquai Automaton Hat) 3D Printer Model' is (stl,zip) file type, size is 4.7MB.
The file 'Arduino-powered Headdress V2 / Bike Helmet (inspired By Jamiroquai Automaton Hat) 3D Printer Model' is (stl,zip) file type, size is 4.7MB.
These are the 3D parts for the Arduino powered headdress v2 which will soon be published at https://www.instructables.com/Arduino-Powered-Headdress-v2/
Stay tuned.
There are two versions of the files:
For tiles & blades:
Thin version: They can be all printed using white filament only - the 'windows' will be transparent enough because they are only 0.2 mm thick.
Thick version: Print the files up to 0.6mm with a transparent filament, then change filament to a white filament.
For eyes:
Thin version: Print everything in white filament
Thick version: Print window with transparent filament, rest in white.
Print the eye backpart in black filament up to 1mm. This will prevent that you will be blinded by the LED light coming through the white part.
No supports needed for most parts. You only need to activate supports for the files 'button box', 'enclosure' & 'eyes'
| All_parts_-_Blades_thick_window.stl | 1.6MB | |
| All_parts_-_Blades_thin_windows.stl | 1.6MB | |
| All_parts_-_Eyes_thick_window.stl | 75.5KB | |
| All_parts_-_Eyes_thin_window.stl | 66.7KB | |
| All_parts_-_Tiles_thick_window.stl | 1.6MB | |
| All_parts_-_Tiles_thin_window.stl | 1.6MB | |
| All_thick_parts_as_single_files.zip | 1.2MB | |
| All_thin_parts_as_single_files.zip | 1.2MB | |
| ButtonBox.stl | 62.1KB | |
| Enclosure.stl | 146.8KB |
