** Version 1.2 ****
*** Outdated version please use V1.3: https://www.thingiverse.com/thing:5894395
This is my DIY Force Feedback Yoke made with Arduino version 1.2.
An updated version of my old Project V1.1: https://www.thingiverse.com/thing:5401069
The Project is still in development and not finished. I've decided to share it to hope for some help to finish it.
Important: Use at your own risk! Be very carefull when handling electric power and your health because of motor driven mechanical parts!
I am not responsible for any damage to man and machine !!!!!!
It is not allowed to use my work in a commercial way.
If you want to use it in an commercial way please contact me or join my Discord:
https://discord.gg/zrYUcJWu7F
The Yoke Lever itself is a make of the CadetYoke v2.0 Project:
https://www.thingiverse.com/thing:4884092
See Documentation, Schematics and Arduino code on my GitHub Page:
https://github.com/gagagu/Arduino_FFB_Yoke
See also my Wiki Page for 3D Printing:
https://github.com/gagagu/Arduino_FFB_Yoke/wiki/3D-Print
See a Video on Youtube (old version):
https://youtu.be/-DBrOv4p11c
| Bearingblock_bottom.stl | 319.4KB | |
| Bearingblock_top.stl | 75.3KB | |
| CadetYoke_Adapter_25mm.stl | 111.8KB | |
| IR_Sensor_Holder_Pitch.stl | 126.8KB | |
| IR_Sensor_Holder_Roll.stl | 105.6KB | |
| IR_Sensor_Pitch_Encoder.stl | 119.4KB | |
| IR_Sensor_Pitch_Endswitch.stl | 27.0KB | |
| IR_Sensor_Roll_Endswitch_1-Part.stl | 126.4KB | |
| IR_Sensor_Roll_Endswitch_2-Part.stl | 24.7KB | |
| LinearGuide_EndStop.stl | 69.4KB | |
| LinearGuide_Plate.stl | 743.2KB | |
| Motor_775_Gear_Hinch_Aeronaut_712455.stl | 201.0KB | |
| Motor_775_Holder.stl | 243.1KB | |
| Pitch_Gear.stl | 310.8KB | |
| Yoke_Gear_150.stl | 958.7KB | |
| Yoke_Pipe_Encoder.stl | 213.5KB | |
| Yoke_Pipe_EndRing.stl | 75.7KB | |
| Yoke_Pipe_EndRing_Sensor-Endring.stl | 76.4KB | |
| Yoke_Pipe_Ring.stl | 14.1KB |
