Arduino + CNC Shield V3 Eggbot 3D Printer Model

Author: @
License: CC BY
File formats: stl
Download type: zip
Size:68.0KB

The file 'Arduino + CNC Shield V3 Eggbot 3D Printer Model' is (stl) file type, size is 68.0KB.

Summary

Hello friends!

Basically, they're just 3D printed parent project parts, a bit of electronics, software, and one modified vertical arm part with bearings

What do you need:

all parent project tools + additional 2x 623 bearing
3D printed vertical arm

Arduino IDE
https://www.arduino.cc/en/Main/Software
EggDuino
https://github.com/schlion/EggDuino
(this fork support CNC Shield and external buttons - turn on/off steppers with state led, up/down arm and pause drawing)
Inkscape
https://inkscape.org/
EggBot PlugIn
https://github.com/evil-mad/EggBot/releases/

The jumpers come on the CNC shield to set the microsteps (see photos).
How you have to connect the servo can also be seen in one of the photos.
The electrolytic capacitor between GND / RST on the CNC Shield is also important.
! Caution !: the negative pole of the capacitor must be connected at "GND".
(but only plug in after installing the EggDuino firmware!).

Here is a short video...
https://youtu.be/DAyxlIdoZEk

vertical_ARM_Bearing_10cm.stl 211.0KB