Arduino Clamp (print In Place) 3D Printer Model
The file 'Arduino Clamp (print In Place) 3D Printer Model' is (stl,ipt) file type, size is 3.2MB.
The file 'Arduino Clamp (print In Place) 3D Printer Model' is (stl,ipt) file type, size is 3.2MB.
This handy clamp is made for printing in one go, thanks to the large spring in the middle the clamp can be stretched up to 22mm.
the clamp is available in 3 sizes so it can accommodate a wide range of PCB's such as Arduino's.
After printing, you remove the raft and the clamp is ready to use.
You can attach the clamp through the two provided holes in the middle of the clamp. It is important that you use o-rings when mounting the clamp to prevent blocking of the clamp!
If you have any questions or suggestions, please let me know and I will see what I can do.
Also check out my Grabcad account for more free 3d models.
I'm currently also working on a Fiverr gig for those who are interested.
| arduino_clamp_arduino_logo.stl | 686.9KB | |
| arduino_clamp_large65mm.stl | 568.7KB | |
| arduino_clamp_no_logo.ipt | 2.5MB | |
| arduino_clamp_no_logo.stl | 559.6KB | |
| arduino_clamp_small45mm.stl | 539.9KB | |
| arduino_clamp_standart.stl | 563.9KB | |
| O-ring.stl | 63.4KB |
