Arcade Stick 3D Printer Model
The file 'Arcade Stick 3D Printer Model' is (stl) file type, size is 63.2KB.
The file 'Arcade Stick 3D Printer Model' is (stl) file type, size is 63.2KB.
Hi all!
I felt the urge to design an arcade stick case myself because I always wanted to make one but despite serveral research on different websites i've never been able to find one that I really liked.
After a couple of weeks of testing I'm happy with it, it's pretty large and comfortable, the printed parts are solid, and if you glue a couple of rocks in it to make it heavier it's way better.
I'm having only one issue with this design, right now the bottom of the case must be glued to the top side because the bottom part is pretty large and using only screws to attach it to the top side will make it bend. I've not been able to sketch any screw housing on the middle section.
Suggested Hardware/Software:
EG START Zero Delay ( shorturl.at/qCK89 )
Old PC
Any RetroArch OS (Like retropie, batocera, etc)
A bunch of Old-But-Gold MAME Roms ;)
Dimensions:
Width: 35 cm
Height: 6,6 cm
Depth: 20 cm
Printing Time: +/- 24 hours
Print Weight: 320 grams
| Arcade_Stick_Case_Left_Bottom.stl | 62.8KB | |
| Arcade_Stick_Case_Left_Top.stl | 87.3KB | |
| Arcade_Stick_Case_Right_Bottom.stl | 24.9KB | |
| Arcade_Stick_Case_Right_Top.stl | 117.0KB |
