The file 'Aranet 4 Home Stand 3D Printer Model' is (stl) file type, size is 104.1KB.
This is a stand for the Aranet 4 home Co2 sensor
https://aranet.com/en/home/products/aranet4-home
I made it mainly so the Sensor sits at a slight angle to make it easier to read when the sun shines on the display.
Print settings I used
Filament: PLA
layer height 2mm
support: 20%
infill: 20-25%
Print position: [I flipped the main body 180 degrees] though you would need to use the print position that work the best for your printer
aranet_4_body.stl | 240.6KB | |
aranet_4_face_plate.stl | 45.2KB |