Remix of the AR15 Vice Block by PrintedFirearm
Recommended to print in ASA or PETG-CF. Included two K1C gcode files for ASA and PETG-CF. The block is subject to a lot of horizontal stress when torquing down the buffer tube nut or barrel nut. I found PLA to be far too brittle and began cracking below 50% infill from the inside. ASA with 100% infill withstood brutal punishment without failing and PETG-CF performs well with some slight flexibility if you don't want to deal with the ASA off gassing.
Infill
60-100%
Walls
3-5
Brim
No
Supports
No
Layer Height
.20 or larger
| AR15_Vise_Bench_Block.stl | 13.2KB | |
| K1C_AR15_Vise_Block_ASA_4h40m.gcode | 12.6MB | |
| K1C_AR15_Vise_Block_PETG_CF_4h2m.gcode | 3.9MB |
