Aquila S2 Fan Shroud “Sonic” Remix 3D Printer Model
The file 'Aquila S2 Fan Shroud “Sonic” Remix 3D Printer Model' is (stl) file type, size is 132.5KB.
The file 'Aquila S2 Fan Shroud “Sonic” Remix 3D Printer Model' is (stl) file type, size is 132.5KB.
I liked the idea of the original shroud. But I made a few changes. Actually I reprinted it 12 times before I got it to be right. (I hope)
I added a couple of 5mm 24v LED's.
I directed the fan for the heat break to be more concentrated on the heat break.
I made the ABL mount to fit a CR Touch. I don't know if it works any better than the others but I think it looks better.
I cut out where I could to save weight but I made the angles so that you don't need supports for them.
I took out the holes for mounting the fans. I just drill small holes and let the screw self tap into the plastic. Works fine just don't over tighten the screws. I used M2 screws for the side fans and m3 screws for the front fan. To mount the CR Touch you could add some brass inserts but I just let the screws self tap into the bracket and it holds just fine.
I changed the part cooling fan defector to be less restrictive
I made a fan guard for the front fan and you can change the decoration very easy to be what you like.
I think the original was a very good design for a printer that seems to be an oddball in the printer world but actually is a very nice printer. I hope you like the improvements that I made.
Happy Printing
| cable_bracket_1.stl | 16.9KB | |
| CR_Touch_shim_2mm.stl | 19.5KB | |
| CR_Touch_shim_3mm.stl | 19.6KB | |
| fan_guard.stl | 225.7KB | |
| sonic_fan_v1.0_RT.stl | 88.5KB | |
| sonic_no_12.stl | 157.8KB | |
| strap_4mm.stl | 16.5KB |
