Aqueon 2.5gal Aquarium Divider 3D Printer Model
The file 'Aqueon 2.5gal Aquarium Divider 3D Printer Model' is (stl) file type, size is 1.6 MB.
The file 'Aqueon 2.5gal Aquarium Divider 3D Printer Model' is (stl) file type, size is 1.6 MB.
Some dividers for an Aqueon 2.5 gallon tank, because they're impossible to find now. I went with a few styles that might be useful for different setups.
The "Potter Divider" .stl is for small plants in terrariums.
The "Stone Wall Divider" .stl is to provide places for reptiles and insects to climb, or to create an easy insert for mosses/dirt/vines. I created a dual-sided version for housing multiple insects in one tank. The dual version requires supports.
The "Ootheca Hanger" .stl is for a mantis to perch while molting, or to attach an ootheca for breeders. Should also work for butterfly cocoons. I know it's hideous, but I just threw it in there in case someone might need it.
USE at least 50% INFILL if you don't want the wall to be flimsier than an index card. I know the long print time sucks for how small this part is, but I printed the first one at 20% and it was 5+hrs for a useless sheet of paper.
| Basic_Divider.stl |
| Dual-sided_Stone_wall.stl |
| Ootheca_Hangar.stl |
| Potter_Divider.stl |
| Stone_Wall.stl |
