Aquarium Underground Bunker 3D Printer Model
The file 'Aquarium Underground Bunker 3D Printer Model' is (stl) file type, size is 30.7MB.
The file 'Aquarium Underground Bunker 3D Printer Model' is (stl) file type, size is 30.7MB.
Observable hideout for aquarium fish with no front wall.
Welcome to the aquarium underground bunker, where you can observe the fish hiding in the depths of the aquarium...or at least that's what we tell the fish! Peer through the glass to the interior and see our underwater residents going about their daily lives, completely unaware of the curious visitors watching them (maybe 🤣). Just don't tap on the glass, our fish have enough stress as it is! 🐟
Dimensions (mm): 140x100x52
Supports: only need for bunker entry overhangs, the rest should not be problems
Quality: 0.2mm may also work (printed myself with 0.16mm)
Infill: lines as in picture (I used 10% infill and drilled small holes in top step & other side in bottom)
Please leave like and make! 👍
Your support means a lot—feel free to leave a tip!
See more:
| AquariumBunkerSimple.stl | 867.3KB | |
| AquariumBunkerTextured.stl | 62.6MB | |
| AquariumBunkerTextured70reduced.stl | 18.8MB |
