Aquarium Tool Holder 3D Printer Model
The file 'Aquarium Tool Holder 3D Printer Model' is (STL,stl) file type, size is 5.7MB.
The file 'Aquarium Tool Holder 3D Printer Model' is (STL,stl) file type, size is 5.7MB.
Simple tool holder for aquarium tools, with space for a clean-up towel, tweezers, scissors, and an algae scraper.
Uses adjustable clamps so it can be attached to any surface between 1.5" and 2" thick, which works perfect for my aquarium table. Will be adding smaller clamp sizes in the future if there is interest.
No supports required, if printed as the following (see image):
Tool Holder x1: logo on the side
Clamp Body Left (x1) and Right (x1): on side, with cutouts facing up
Towel Hanger (x1): flat side down
Nut (x2): flat side down
Clamp (x2): flat side down
Tolerances are TIGHT, by design. Needs to support its own weight and that of the tools.
Remixed from "yet ANOTHER Headphone Hanger" - https://www.thingiverse.com/thing:4479366 because the clamp design is great.
| Clamp.STL | 293.5KB | |
| Clamp_Body-Left.stl | 3.4MB | |
| Clamp_Body-Right.stl | 3.4MB | |
| Nut.STL | 7.3MB | |
| tool_holder.stl | 153.8KB | |
| Towel_Hanger.stl | 13.8KB |
