Aquarium Tank Cleaner 3D Printer Model
The file 'Aquarium Tank Cleaner 3D Printer Model' is (stl) file type, size is 30.9KB.
The file 'Aquarium Tank Cleaner 3D Printer Model' is (stl) file type, size is 30.9KB.
This is a aquarium tank magnetic cleaner.
Recommended to use 15mm diameter with 3mm thickness of neodymium magnet. Tested on 5mm thick of tank glass and if your tank thickness is larger than 5mm will recommend to use stronger or thicker neodymium magnet as the space to fit in the 1mm to 3mm scouring pad.
Eg:
3mm thickness neodymium magnet = 3mm thickness scouring pad
5mm thickness neodymium magnet = 1mm thickness scouring pad
As the neodymium magnet will also corrosive, hence, you can put a layer of hot glue on the magnet to avoid fast corrosive happens.
| Tank_Cleaner_Inner.stl | 39.7KB | |
| Tank_Cleaner_Outer.stl | 111.0KB |
