Aquarium Filter / Water Polisher Attachment For Powerhead 3D Printer Model
The file 'Aquarium Filter / Water Polisher Attachment For Powerhead 3D Printer Model' is (stl) file type, size is 372.9KB.
The file 'Aquarium Filter / Water Polisher Attachment For Powerhead 3D Printer Model' is (stl) file type, size is 372.9KB.
I have been using a Marineland powerhead with a drinking water bottle attached with the bottom cut off and filter floss inside as a water polisher after doing tank cleanings to get rid of the nastiness. I wanted something a bit more sturdy and had holes all around. The little strainer adapter that comes with the powerhead should fit snugly into the endcap. I used supports on end cap 1. Not the most efficient design or the prettiest but works for my needs.
The endcaps are sized so they should fit on the openings of the basket nice and tight, should not need to glue anything.
This fits the Marineland Maxi-Jet 400, I suggest printing end cap 1 first and test to see if it fits and resize accordingly if needed , If you have the same powerhead , it should fit with no resizing needed.
| Water_Polisher_Basket.stl | 1.0MB | |
| Water_Polisher_Endcap_1.stl | 47.0KB | |
| Water_Polisher_Endcap_2.stl | 150.6KB |
![Venturi Nozzle For Aquarium [reworked] 3D Printer Model](https://cdn.3axis.co/assets/c6/5c/e0/85/c65ce085-d806-4a1d-9bfc-802026a6b6c0/images/66e7c59e-55a6-49c0-803c-5ed02fb8924a_thumb.jpg)
