Aquarium Airline Hose Connectors 3D Printer Model
The file 'Aquarium Airline Hose Connectors 3D Printer Model' is (stl) file type, size is 7.8MB.
The file 'Aquarium Airline Hose Connectors 3D Printer Model' is (stl) file type, size is 7.8MB.
I am re-doing the airline setup for my aquarium. I needed some of the little airline hose inserts and didn't have any, so my wife said "Why don't you print some?". I looked to do this, but couldn't find any pre-made STLs, so I took to designing them myself.
I recommend printing these in PETG or another non-soluble filament (PLA will dissolve in the water over time, while not harmful to the fish, it will cause some grief).
I printed these at 0.15mm resolution at a speed of 70mm/s. I use Overture PETG with a recommended range of 230 - 250, I printed these at 245 to reduce stringing, you will likely need to come back with a heat gun after the print to clean them up.
I also recommend using organic supports on the T & Elbow and printing them upright, this gave the best quality IMO. See the pictures for ideas.
| Airline_Tube_Connector_-_90_Elbow.stl | 31.0MB | |
| Airline_Tube_Connector_-_Striaght.stl | 26.1MB | |
| Airline_Tube_Connector_-_Tee.stl | 39.4MB |
