Remixed to allow you to insert an Apple Pencil as a horn instead of the printed model. This supports models 1 and 2. My model was printed with the following settings:
CURA Base Profile: Dynamic Quality (0.16mm Layer Height)
Support Type: Tree
Support Density: 3%
Support Placement: Touching Buildplate
Infill Density: 20%
Infill Pattern: Cubic
Build Plate Adhesion: Brim, 8mm width
Scaled Print Height: 47mm
| CE3PRO_narwhal.stl | 71.6MB | |
| simplify_CE3PRO_narwhal.stl | 6.9MB |
