Apple AirTag MOLLE And Universal 25mm Webbing Mount 3D Printer Model
The file 'Apple AirTag MOLLE And Universal 25mm Webbing Mount 3D Printer Model' is (stl) file type, size is 106.5KB.
The file 'Apple AirTag MOLLE And Universal 25mm Webbing Mount 3D Printer Model' is (stl) file type, size is 106.5KB.
This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs!
Furthermore I used the official apple design guidelines to get the curvature of the AirTag just right.
This mount requires no tools to assemble.
To disassemble this mount, the cap has a small notch to use a screwdriver.
Find more projects like this on my blog :)
https://blog.hirnschall.net/
Do not reorient the parts. They are designed to print without support and are oriented for maximum strength. If you reorient them such that the layer-lines are normal to the prongs that interface with the webbing they might break off.
You need to print:
If the AirTag does not fit easily inside the airtag-molle.stl, use a negative value for the "XY Size Compensation" setting in the slicer for this part (e.g. -0.1mm). Move on to print the cap.
If the cap cannot be pressed into the airtag-molle.stl, use a negative "XY Size Compensation" value.
If the cap is too loose inside the airtag-molle.stl use a positve "XY Size Compensation" value.
| airtag-molle.stl | 635.7KB | |
| cap.stl | 506.7KB |
