Apollo Mission Set 3D Printer Model
The file 'Apollo Mission Set 3D Printer Model' is (stl,zip,STL) file type, size is 46.9MB.
The file 'Apollo Mission Set 3D Printer Model' is (stl,zip,STL) file type, size is 46.9MB.
Apollo Mission including the moon, astronaut, lunar lander and moon stand.
Moon: I split into two halves using meshmixer and added a hole/peg. I also have the full moon stl. In order for the peg to fit, you need to scale the moon halves to 225%.
Astronaut: no change from original.
Lunar lander: no change from original. Scale as desired. I scaled to 150%.
Stand: no change from original. Scaling down may be better but I did 100%.
I printed everything on a heavily modified DaVinci Pro 1.0 with 100% fan at .15mm layers. Varied infill and perimeters between everything. I used glow PLA at 210C. Various brims were used as well. Everything can be printed without supports.
| ApolloPlate.stl | 4.7MB | |
| Apollo_Astronaut_even_better_supports.stl | 13.0MB | |
| Apollo_Items.zip | 23.6MB | |
| ascent.stl | 833.3KB | |
| Ball_Stand.STL | 1.2MB | |
| command.stl | 1001.5KB | |
| descent.stl | 935.9KB | |
| moon.stl | 27.2MB | |
| Moon_Bottom.stl | 2.1MB | |
| Moon_Top.stl | 3.5MB | |
| pinpeg.stl | 216.1KB | |
| Pin_8.5mm_x_33.5mm.stl | 3.8KB | |
| service.stl | 1.1MB | |
| serviceRing.stl | 103.3KB |
