A set of 3D printed brackets used to mount the radiator to the graphics card pulled form the Aorus Gaming Box. Design also includes IO shield and slots to hold the 8 pin PCIE power connectors.

Bill of materials:

• .#6-32 UNC (>6 mm long) screw 4pcs (PC screw with "coarse" thread)
• M3x5 screw 3pcs (standard metric PC screw)
• M3x10 screw 2pcs (fixes the IO shield to the PCB of the graphics card)
• M3 brass heat insert 3pcs
• Set of original screws from the rear video ports of the Gaming Box
• Self tapping screws diameter ~2 mm (to hold the PCIE power connectors in place)

Assembly:

1. Bend the tab of the IO_bracket 90° with the help of heat and an object with right angle corner
2. Melt the heat inserts into the three blind holes of the front_bracket
3. Swap the fans to the other side of the radiator as shown in the first photo (optional but recommended)
4. Install the IO_bracket onto the radiator
5. Carefully slot the GPU into the installed IO_bracket and secure it with screws
6. Screw the front_bracket to the GPU using M3 PC screws
7. Screw the installed front_bracket to the radiator
8. Press the PCIE power connectors into the corresponding slots
9. Secure them with PWR_cn_bracket and self tapping screws
10. Install the GPU into your PC and don't forget to add some kind of support under the radiator!

An IO bracket without the radiator mount is also included