Anycubic Vyper Filament Sensor Holder – Print Optimized 3D Printer Model
The file 'Anycubic Vyper Filament Sensor Holder – Print Optimized 3D Printer Model' is (stl) file type, size is 189.4KB.
The file 'Anycubic Vyper Filament Sensor Holder – Print Optimized 3D Printer Model' is (stl) file type, size is 189.4KB.
I took the referenced Filament Sensor holder and optimized it a bit on my way. So, I reduced the amount of printable objects and tried to include everything in as less parts as possible. So, the print may need a bit more filament, but should be more simplified for the printer itself. I also adjusted the bolt a bit with a wider head.
So, you will not need any additional distance discs. You also still need the M3 screws, nuts and the bearing 608. Washers are not mandatory - it also fits without. As well you need to remove the distance holder of the sensor itself by just opening the case of the sensor with a small screwdriver .
Also for a bit more comfort, you should buy another M3x10 screw, because one of them is a bit shorter - but it's not mandatory.
Update: I added a second version with an assymetric adjustment of the bearing as the filament sensor does also have an assymetric structure.
| Filamentsensorhalter.stl | 417.3KB | |
| Filamentsensorhalter_Achse.stl | 56.3KB | |
| Filamentsensorhalter_v2.stl | 417.3KB |
