This filament holder is for the Anycubic Vyper .... well known from the Ender 3. You still need two 608ZZ bearings.
The design was taken from chickensaretoobig (see remix) as it is the same spool holder adapter. The adapter has been realigned (rotated) so that it fits perfectly to the standard mount of the Anycubic Vyper.
Print settings:
Printer: Anycubic Vyper
Resolution: 0,2mm
Support: yes
I used black PETG ...PLA will also fit, of course.
gcode - files
The gcode file is only for the Anycubic Vyper! Use at your own risk!
Die gcode-Datei ist nur für den Anycubic Vyper bestimmt! Benutzung auf eigene Gefahr!
Material: PETG (210°C / 70°C) - change on the display if necessary
Fan should be operated at 100%.
| FilHolder_80mm_Anycubic-Vyper.stl | 2.1MB | |
| FilRoller_80mm_Anycubic-Vyper.stl | 744.5KB |
