Anycubic Photon Air Vent System 3D Printer Model

License: CC BY-NC
File formats: stp,stl
Download type: zip
Size:3.7MB

The file 'Anycubic Photon Air Vent System 3D Printer Model' is (stp,stl) file type, size is 3.7MB.

Summary

Order of Assembly from Left to Right:
Remove old filterbox (description below)
Fanduct - redirects the air from the chambre to the back (otherwise the cooling fan blows the air out under the machine), insert the nuts, maybe ad some caulking.
Cover - replaces the factory on, includes the clip-on mount (You can use the B-Cover instead, but assembly will be more difficult) fix the Cover to the fanduct.
When using the "2_Cover" following parts can be assembled separat. (otherwise in order)
Funnel - extends the the channel to accept a 120 mm PC-Fan, can be slid in from the top. (For the B-Funnel, reach through the opening and tighten screws)
Gasket 'optional' - from elastic material, you can use caulking instead
Fan - use short screws to attach it to the Funnel, I used a usb powered one https://www.amazon.de/gp/product/B06XQWMFDQ/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=creativepro0d-21&creative=6742&linkCode=as2&creativeASIN=B06XQWMFDQ&linkId=631a65d673f127962890e0bcdd566223 US: https://www.amazon.de/gp/product/B06XQWMFDQ/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=creativepro0d-21&creative=6742&linkCode=as2&creativeASIN=B06XQWMFDQ&linkId=631a65d673f127962890e0bcdd566223
Gasket 'optional' - same as before
Vent - For attaching a 100 mm / 5 inch exhaust hose, use short screws to attach it to the Fan (maybe a hose clamp)
(For the B-Version you need long screws to sandwich everything together)


Update:
The Fanduct is now at its final version.
I added alternativ versions of "Cover" and "Vent", which can be screwed together. The Vent is installed first than use ~30mm long m3 screws with nuts to install the rest.

Hi, I really like the Anycubic Photon, but I use the officially most stinky resin, so I had to come up with something to get rid of the fumes. The stock filter isn't efficient enough, and the LED cooling Fan distributes the fumes in the room.

With this Vent system you can direct the fumes outside or through a sufficient air filter.
All parts are designed to be print without any support.
A 120 mm PC Fan can be installed to help with the evacuation.
Use a 100 mm or 5 inch exhaust hose (Abluftschlauch)

For Installing the Fanduct, you have to remove the Filter-Cover (sheet-metal).
(Unscrew the Fan in the Chamber. can't remember if necessary).
Open the Back plate and remove the screws for changing the carbon filter, it will reveal two more screws.(youtu.be/6JowsfJEdHs - can help)
Remove the Printer Cover and replace the old filter with the Fanduct.(youtu.be/Hvggm00agiQ - just first minute)
You may have to use longer screws; guide the Fan cables through the slit; you may want to use caulk or grease to seal it air tight.

The next steps are easy, use the assembly-schematic.
You can use caulking instead of the gaskets (or nothing).

The Exhaust-Assembly can be simply slid on and of.

Have Fun

0_Assambly.stp 1.8MB
1_Fanduct.stl 4.8MB
2_B_Cover.stl 334.7KB
2_Cover.stl 502.1KB
3_B_Funnel.stl 1.4MB
3_Funnel.stl 1.1MB
4_Gasket.stl 113.4KB
5_Vent.stl 1.0MB