Anycubic Mono 6Ks Build Plate Drip Bracket 3D Printer Model
The file 'Anycubic Mono 6Ks Build Plate Drip Bracket 3D Printer Model' is (stl) file type, size is 31.6KB.
The file 'Anycubic Mono 6Ks Build Plate Drip Bracket 3D Printer Model' is (stl) file type, size is 31.6KB.
A bracket to fit on the Anycubic Mono 6Ks resin printer to hold the build plate at a 40° angle to all excess resin to run-off back into the vat.
The bracket is designed to fit onto the Z-arm just behind where the build plate fits and remain in place.
The sizes allow it to remain clear of the plate whilst printing and hold the plate above the vat whilst dripping. Be aware that due to the dimensions of the printer, it may be possible for the bracket to make contact with the resin during the early layers if the vat is full.
The bracket is designed to fit snug on the arm to avoid moving.
| Anycubic_Mono_X6Ks_Build_Plate_Drip_Bracket.stl | 80.8KB |
