Carefully measured Model of an Anycubic Mega X. Almost finished, has 99% of the Parts you will want in a CAD Model.
Enjoy!
V1
Added:
- the Base
- Holes on the Frame for the Top Fixtures
Missing:
- Extruder-Motor bracket and Motor
- Screws, Nuts......etc
V0.2
Added:
- New Version of the Plate under the Heated Bed
- New Y-Rail and endplates
- Y-Axis Rollers (Redesigned)
- Tentioning System y-Axis
- Endstop Plate y-Axis
- Rough adjustment of Frame Height. (Model center is the Nozzle)
Missing:
- the Base
- Holes on the Frame for the Top Fixtures
- My own Designs and adaptations
- Screws, Nuts......etc
V0.1 Missing:
- the entire Base
- y-Axis rollers and Rail
- Holes on the Frame for the Top Fixtures
- My own Designs and adaptations
- Screws, Nuts...... just check for yourself, it´s a lot missing stil. :`)
Added:
- Guidance for the Z-Endstop-Screw to be put in place from the top. Should help to steady the screw and give better Z-Precision for the initial layer. Haven´t tried that yet, because my Printer is in parts atm. (Horribly bent Z-Spindels due to shipping.)
I will probably work on the Modell from time to time. Let me Know if you are interested in Updates or if you find any flaws in the Model.
