For my Osram 24v LED transformer (Picture), I needed a housing that optically matched the printer.
The original was white and attached to the printer with cable ties. I did not like that ...
This housing is screwed to the 2020 profiles.
For the assembly you need:
4 pieces Screws M3x6mm
4 pieces of T-nuts M3
2 pieces Screws M2,5x6mm
inside dimensions of the box:
length= 85mm
width= 44mm
height= 26mm
| Anycubic_Electric_Box.stl | 244.8KB | |
| Anycubic_Electric_Box_Cover.stl | 168.5KB |
