Anycubic Kobra 2 Max Filament Adapter 3D Printer Model
The file 'Anycubic Kobra 2 Max Filament Adapter 3D Printer Model' is (STL) file type, size is 383.8KB.
The file 'Anycubic Kobra 2 Max Filament Adapter 3D Printer Model' is (STL) file type, size is 383.8KB.
I made a 90° adapter so that with minimal changes the printer would fit into an enclosure.
https://www.thingiverse.com/thing:6458557
The original worked, but was too flimsy to hold the full spool for long. It also needed a guide roller.
I beefed up the adapter and merged it with a roller I had already produced (for a hornet) with the adapter. All was working fine until I started printing ABS and the adapter sagged.
I plan to connect it to the rail as well as the upright, until then I designed and printed a support that sits on the enclosure frame.
I used the original Spool holder and it fit, but it's TIGHT to lock on.
BTW. Some kind person wanted to tip me for the previous iteration. Its kind but unnecessary. For personal reasons I won't bore you with, please donate to Cancer research if you must.
| Kobra_2_Filament_guide_and_roller.STL | 1.2MB | |
| Kobra_2_Filament_guide_and_roller_support.STL | 19.9KB |
