Send your weeping enemies flying with this powerful electric flipper!
This 1 pound flipper can be just as evil in the one pound class as the cruel HYDRA from which it takes inspiration!
This robot does require a bit of Titanium plate cutting to be in best form but it can be relatively simply done with tin snips and a drill.
parts list is included and please feel free to ask if you have any questions!
If you end up building or modifying this please post a make photo! thanks!
UPDATE: it doesn't seem to like being printed in tpu, wheels tip because of the flexability and rub on the frame. Would probably recommend sticking with Nylon or PLA+
UPDATE: Added a simplified version of the frame that can accept forks and side armor to allow that.
Watch this bot in action here: https://youtu.be/CkL8_JeGtiw?si=jlhu2xgrsKRSxosI&t=2780
| 3mm_fork.stl | 12.2KB | |
| Antweight_flipper_Parts.txt | 1.8KB | |
| ARM_BAR.stl | 54.8KB | |
| Dummy_SERVO_ARM_support.stl | 86.7KB | |
| Electronics_cover.stl | 198.6KB | |
| FLIPPER_ARM.stl | 205.0KB | |
| FLIPPER_END.dxf | 10.4KB | |
| FLIPPER_FRONT.dxf | 20.9KB | |
| FLIPPER_SIDE_ARMOR.dxf | 18.3KB | |
| FORK_3MM_THICK.dxf | 12.0KB | |
| FRAME.stl | 2.1MB | |
| front_flip_plate_template.stl | 61.6KB | |
| lower_wedge_template.stl | 59.4KB | |
| motor_clamp_front.stl | 215.8KB | |
| motor_clamp_left.stl | 245.7KB | |
| motor_clamp_right.stl | 246.7KB | |
| Rightleft_side_armor_template.stl | 61.6KB | |
| Side_armor_with_fork_slot.dxf | 58.1KB | |
| Side_armor_with_fork_slot.stl | 80.2KB | |
| v2_Frame_Fork_mounts.stl | 2.2MB |
