Ant Queen Tube Incubator – 13mm Test Tube 3D Printer Model
The file 'Ant Queen Tube Incubator – 13mm Test Tube 3D Printer Model' is (stl) file type, size is 36.6KB.
The file 'Ant Queen Tube Incubator – 13mm Test Tube 3D Printer Model' is (stl) file type, size is 36.6KB.
2024-03-06: Update
I've added 3 lid's for the Test tubes, so you dont need to use Cotton to close the exit so the Queen cant excape.
The 3 Lid's are, Full Closed, Closed with airvent of 0.5mm and Closed with Airvent of 0.3mm.
Not much to find when you are trying to find Ant Queen Tube Incubators, so I decided to make my own.
This include 1-5 incubators, choose as you want.
Printing the model is most perfect by standing up but it will take 100% extra time to complete, if you just lay it down.
If you Lay it down, you have to work a little with it with a hobby file tool and work with every tube for 1-2 mins.
The test tube which fits 13 x 100 mm, dont stick out from the incubator!
This Ant Queen Tube Incubator fits to 13 x 100mm Test Tubes, as you can buy eg. from Aliexpress where I have bought mine.
| Ant_Queen_Feeding_Tube_Endcap-Airholes-3mm.stl | 20.8KB | |
| Ant_Queen_Feeding_Tube_Endcap-Airholes-5mm.stl | 20.8KB | |
| Ant_Queen_Feeding_Tube_Endcap-Closed.stl | 17.5KB | |
| Ant_Queen_Tube_Incubator-001.stl | 6.9KB | |
| Ant_Queen_Tube_Incubator-002.stl | 16.7KB | |
| Ant_Queen_Tube_Incubator-003.stl | 26.4KB | |
| Ant_Queen_Tube_Incubator-004.stl | 37.4KB | |
| Ant_Queen_Tube_Incubator-005.stl | 46.0KB |
