All the files i've made and remixed from the original Slimbox make.
The 24 and 30mm buttons are for a MX Cherry like called Gazzew.
It's a lot higher than the original because i used a Raspberry pi Pico H which use dupont connectors which are high so i couldn't lay it flat.
My personal recommendation is using a regular Raspberry Pico W or a RP2040-CE.
The top is the same as the original, the Gazzew switches are STUCK in there now so they're not gonna get loose at least. Could probably make the holes for the switches a bit lower as they are a bit high.
| Body1.stl | 250.7KB | |
| BottomLowHoles.stl | 155.0KB | |
| GazzewWithCorners.stl | 76.4KB | |
| KailhKeycapSmall.stl | 38.6KB | |
| Newest30mm.stl | 86.2KB |
