Another Leapfrog Creatr Enclosure With Wifi Cam And Side Plates Openers 3D Printer Model
The file 'Another Leapfrog Creatr Enclosure With Wifi Cam And Side Plates Openers 3D Printer Model' is (STL,DXF) file type, size is 1.6MB.
The file 'Another Leapfrog Creatr Enclosure With Wifi Cam And Side Plates Openers 3D Printer Model' is (STL,DXF) file type, size is 1.6MB.
Hi
This is a Leapfrog Creatr enclosure with Wifi Cam and side plates openers
The walls are from 5mm clear acrylic (with few more holes for flexibility)
All the screws except the rail screws are M4 with M4 Nuts and plastic washers (with few lengthens and screw heads)
The rail screws are M8 Nut with their heads grind to fit in the rails (https://youtu.be/SmlmNkBJR4A )
The printed part are from ABS
Self holding acrylic hinge
I have printed the upper hinges in the connected form (but two parts STL files are also included)
https://youtu.be/MmahfyKiX-0
There is a back holder for the enclosure but I haven’t used it in the end
The acrylic part under the upper door has two functions :
Keep in mind that under this acrylic rest there is a shorter corner (to offset for the 5 mm of the part ) corner inner -5mm .STL
The door handle is connected to the door with an Iron screw and there is a Magnet holder that hold the door in place with a 6.2 mm X 6.2mm diameter NEODYMIUM MAGNET
Side plates openers
For a long time I am using the side plates opener from Ghost3D (http://www.thingiverse.com/thing:307931 )and they are very handy for maintenance and for removing printed parts from the print bad
I have designed a slider lock that from one end holed the acrylic enclose and from the other hand as a slider that lock and unlock the side plates in place
Wifi Camera
The Wifi camera is the DX SKU 449864 (http://www.dx.com/p/suneyes-sp-v701w-720p-hd-mini-wireless-outdoor-ip-camera-eu-plug-449864#.WMU2rW996Uk)
The M12 lens was replaced for a wider angle lens (from ~65 degrees to ~120 degrees)
And a new smaller enclosure Based on Gilad's mount (http://www.thingiverse.com/thing:267313) with new holder and a rail mount to holed the camera in the printer and the antenna outside of the printer
Sorry for the spelling mistakes
B.O.M :
LASER CUT (dxf files):
1 part of - quickest owl - leap - clear acrilic 5 mm one part 4.3.2017.DXF
1 part of - quickest owl - upper door - clear acrilic 5 mm one part 4.3.2017.DXF
1 part of - quickest owl -upper part - clear acrilic 5 mm one part 4.3.2017.DXF
1 part of - quickest owl - back part - clear acrilic 5 mm one part 4.3.2017.DXF
2 parts of - quickest owl -side wall - clear acrilic 5 mm two parts 4.3.2017.DXF
1 part of - quickest owl - front door - clear acrilic 5 mm one part 4.3.2017.DXF
DOOR:
3 parts of - door hinge long.STL
3 parts of - boddy hinge.STL
1 part of - dore handel.STL
1 part of - boddy magnet holder therd view.STL
UPPER ENCLOSURE :
2 parts of - corner.STL
1 part of - corner inner -5mm .STL
12 parts of - corner inner .STL
4 parts of - upper hinge asembly v 2 .STL
ENCLOSURE AND PRINTER BRACKETS:
6 parts of - iner acril boddy holder.STL
4 parts of - outer boddy acril holder external wall holder.STL
4 parts of - outer wall holder slider.STL
2 parts of - outer boddy acril holder.STL
1 part of - inner boddy acril holder back v1.STL
1 part of - outer boddy acril holder back v1.STL
WiFi Camera:
1 part of - boddy camera holder v2.STL
1 part of - CAMERA PT.STL
1 part of - camera cover.STL
Camera back is from Gilad's files
Thanks Amnon
www.Quickest-Owl.com
| boddy_camera_holder_v2.STL | 308.1KB | |
| boddy_hinge.STL | 306.0KB | |
| boddy_magnet_holder_.STL | 105.6KB | |
| boddy_magnet_holder_sec_view.STL | 104.3KB | |
| boddy_magnet_holder_therd_view.STL | 107.0KB | |
| camera_cover.STL | 344.1KB | |
| CAMERA_PT.STL | 294.2KB | |
| corner.STL | 199.2KB | |
| corner_inner_-5mm_.STL | 76.1KB | |
| corner_inner_.STL | 81.1KB | |
| door_hinge_long.STL | 298.0KB | |
| dore_handel.STL | 108.2KB | |
| iner_acril_boddy_holder.STL | 67.3KB | |
| inner_boddy_acril_holder_back_v1.STL | 107.3KB | |
| outer_boddy_acril_holder.STL | 108.5KB | |
| outer_boddy_acril_holder_back_v1.STL | 101.2KB | |
| outer_boddy_acril_holder_external_wall_holder.STL | 91.3KB | |
| outer_wall_holder_slider.STL | 138.1KB | |
| quickest_owl_-side_wall_-_clear_acrilic_5_mm_two_parts_4.3.2017.DXF | 24.3KB | |
| quickest_owl_-upper_part__-_clear_acrilic_5_mm_one_part_4.3.2017.DXF | 26.3KB | |
| quickest_owl_-_back_part_-_clear_acrilic_5_mm_one_part_4.3.2017.DXF | 24.8KB | |
| quickest_owl_-_front_door_-_clear_acrilic_5_mm_one_part_4.3.2017.DXF | 27.6KB | |
| quickest_owl_-_leap_-_clear_acrilic_5_mm_one_part_4.3.2017.DXF | 23.4KB | |
| quickest_owl_-_upper_door_-_clear_acrilic_5_mm_one_part_4.3.2017.DXF | 24.6KB | |
| upper_hinge_asembly_sep_-_upper_hinge_left-1.STL | 271.9KB | |
| upper_hinge_asembly_sep_-_upper_hinge_right-1.STL | 365.4KB | |
| upper_hinge_asembly_v_2_-_upper_hinge_left-1.STL | 272.3KB | |
| upper_hinge_asembly_v_2_-_upper_hinge_right-1.STL | 388.3KB | |
| upper_hinge_asembly_v_2_.STL | 656.0KB |
