EDITABLE IN -FUSION 360-
*Nice presentation for filament testing.
*Specially designed to be cheap and quick to print.
-No supports required.
-No infill required.
(for both parts)
It’s specifically designed for a 0.4 nozzle. I recommend using at least 3 walls to ensure the color matches as closely as possible to the filament.
The OFFSET for the 'color test' to fit into the BASE is 0.2mm (this is set from the main design, so you don’t need to adjust anything in your slicer, but keep it in mind since not all printers are that precise).
Make sure to purge the nozzle when changing filament, as leftover filament can mix with the new color.
| Filament_Test-BASE.stl | 494.2KB | |
| Filament_Test_Fusion360_format.f3d | 6.1MB | |
| Filam_TestLUKTEC_Orange_200_0.2mm.stl | 1.0MB |
