Another Cable Guide 3D Printer Model
The file 'Another Cable Guide 3D Printer Model' is (stl) file type, size is 170.0KB.
The file 'Another Cable Guide 3D Printer Model' is (stl) file type, size is 170.0KB.
Another Cable Guide.
Mounts on the rear of the X Gantry.
This one is in 3 parts, the main mounting bracket requires 2 M5 T nuts and a couple og M5 Bolts approx 8mm long.
The Cable clamp has been designed to allow rotation when needed.
The 2 parts are fixed together with a 3d printed pin, designed to be a tight fit in the mounting arm and loose through the clamp/cable guide.
This pin may need a little sanding to get a good fit depending on the accuracy of your printer, flow calibration and slicer settings.
Don't be tempted to print the pin with a small layer height that will make it weaker, i'd use at least a 0.20 layer height and 100% infill.
The pin is designed to be 0.20mm too long so when fully home there should be a small gap.
| Cable_Holder.stl | 201.8KB | |
| Mount.stl | 42.5KB | |
| Pin.stl | 257.3KB |
![Real Life Size Omniwerench 8000 From Ratchet And Clank (PS2) [Separarted] 3D Printer Model](https://res.3axis.co/cc54f9a0-328a-40cf-863e-2ef98ad91b8e/images/97e62c88-b6b1-4ff8-bf98-8cb948356ab9_thumb.jpg)
