Anime Alpha Hydranoid – Bakugan 3D Printer Model Free Download

Description Files (14)

Summary

Anime Accurate Alpha Hydranoid - Fully Functional

Video: https://www.instagram.com/p/C9C02uSRg1C/?igsh=MXAydTc2YnhtdXY1

For the center sliding mechanism and head, The center sliding piece uses pins as railing to smoothly slide forward and back, the length required is 22mm. Some of my early testers used a Cosmic Ingram's wing pins, but pins that fit the length requirement will do fine. I used a Base Tigrerra (B1 is what I used). The spring wraps around the pin on the Left Body (see image of the inside above) to keep the spring in place. The sliding mechanism requires a compression spring and a Tigrerra has this as well as the top flap spring can be used for the head. The wing springs and magnet springs can come from anywhere as long as they fit. Do note that the magnet spring may need to be cut down if tension is too high and magnet isn't activating.

Pin holes are set to 1.6mm size. If you want to use your own set of pins, I recommend 1.4/1.5mm to give some clearance to rotate.

Obviously, if you have a bunch of broken gans lying around and/or have access to a variety of spring and pins, freestyle it.

Good Luck!

NOTE: This is a very difficult print. I don't know a single gan that can substitute as a sacrifice so to speak because of it's unique parts lists (let me know if there is a single gan that is cheap and common and I will add it to to here). Don't let this deter you though, it is a very cool gan and the center sliding piece is a small but accurate to the anime.

Horn.stl	115.8KB
Inner_Hook.stl	288.1KB
Left_Body.stl	685.8KB
Left_Head.stl	375.4KB
Left_Leg.stl	435.8KB
Left_Side_Head.stl	129.1MB
Left_Wing.stl	1007.4KB
Right_Body.stl	714.4KB
Right_Head.stl	383.5KB
Right_Leg.stl	448.8KB
Right_Side_Head.stl	129.1MB
Right_Wing.stl	1007.4KB
Saw.stl	779.1KB
Tail.stl	201.8KB

Anime Alpha Hydranoid – Bakugan 3D Printer Model

Summary

Tags

You might also like