This thing is an animatronic face mechanics for demo purposes of the bechele software (https://bechele.de). It uses 12 servos for different movements. Have a look at the demo video to see it in action:
https://youtu.be/QalkR-c4_Ys
Actually I did not plan to publish, but some users askd for it. So here are the parts.
To build the whole puppet head, you need also the following thing:
https://www.thingiverse.com/thing:4058084
Please note, that after printing some post processing is required.
See the following Video to understand how parts are mounted:
https://youtu.be/Qj-uKgw153A
| Demohead.stp | 32.0MB | |
| eyes_connection_plate.stl | 326.0KB | |
| foot_plate.stl | 1.8MB | |
| latex_lip_core.stl | 8.6MB | |
| left_mouth_corner.stl | 288.9KB | |
| lower_lip.stl | 417.5KB | |
| lower_lip_lever.stl | 110.4KB | |
| mainframe.stl | 1.1MB | |
| Mainframe_neck_angle.stl | 204.6KB | |
| mouth_edge.stl | 1.2MB | |
| neck_connection_clamp.stl | 167.1KB | |
| neck_lever_forward.stl | 302.4KB | |
| neck_rotation_servoholder.stl | 599.3KB | |
| neck_shaft.stl | 547.8KB | |
| right_mouth_corner.stl | 287.9KB | |
| rope_wheel_neck.stl | 87.0KB | |
| servo_stabilizer.stl | 308.5KB | |
| tilt_plate_left_right.stl | 602.2KB | |
| upper_lip.stl | 54.8KB |
