Go the learn guide for the UF2, code, build photos and way more info on this project! https://learn.adafruit.com/hallowing-m4-candy-bowl/
https://youtu.be/gmaii6LJLwc

Here are those links:

Adafruit HalloWing M4
https://www.adafruit.com/product/4300

4400mah battery
https://www.adafruit.com/product/354

USB cable
https://www.adafruit.com/product/4111

Plastic Convex Lens
https://www.adafruit.com/product/3917

JST Extension Cable
https://www.adafruit.com/product/1131

M2.5 Standoff Kit
https://www.adafruit.com/product/3299

HWUF in this project we are upgrading our candy bowl with an animated eye.

This year we’re tricking out our candy bowl with Adafruit’s HalloWing M4.

This animated eye looks pretty realistic and you can use the touch pads to trigger LED animations.

So get ready to win this years Halloween with animated eyes.

The HalloWing M4 has everything you need to add an animated eye to your projects.

It features a new IPS display so it looks great at just about any angle.

It’s also has built in NeoPixels, so you create some really nice lighting effects.

In this project, you can touch the pads to cycle through four different LED animations.

It’s really easy to setup the HalloWing M4 with new software.
With Adafruit’s firmware, you can install new programs without having to setup arduino.
Just download the UF2 files from the learn guide.
Plug in over USB and double press the reset button to load the BOOT drive.
Then just drag and drop the UF2 file onto the USB drive.
The board will automatically restart with the new software.
This makes the process so much easier so you can quickly get your projects up and running.
It’s never been easier to add electronics into your projects.

This was a lot of fun to work on and we hope this inspires you to get your projects ready for halloween.
Be sure to check out the adafruit discord server so you can chat with the community.
We wanna give big shout out to you folks sharing your projects!
We invite you to Adafruit’s Show and Tell Live stream so you can be awarded a free vinyl sticker.

Thanks for watching and don’t forget to subscribe for more projects from Adafruit.

3D Printing Projects Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Visit the Adafruit shop online - http://www.adafruit.com