Animal Crossing Beginner House 3D Printer Model
The file 'Animal Crossing Beginner House 3D Printer Model' is (stl) file type, size is 864.36 KB.
The file 'Animal Crossing Beginner House 3D Printer Model' is (stl) file type, size is 864.36 KB.
This is a humble replica of Nintendo Animal Crossing based on pictures posted of other prints and game screenshots. Dimensions and shapes may not be exact.
Printing:
The stl files are chimney, roof, foundation(slab), front wall, back wall, inner wall and just the right was as it exact same print as left wall.
I used Creality slicer and Dynamic Quality 0.16mm parameters for Ender 3/ Ender 6, 0.4mm nozzle. Material PLA+, Bed 65C and Nozzle 210C.
Mostly struggled with printing front and back walls and little bit of slab printing because slight warping in the corners in middle of printing process, could have been fixed by bed temp adjustment or using adhesive paste.
I printed parts flat, duh, except chimney and inner wall, roof sideways but who knows if i printed walls upright, i would have overcome warping issues.
Also i would like to mention, added connections to parts like lego pieces, it didn't print as good, ended up cutting them off and glued parts together.
| BackWall.stl |
| Chimney.stl |
| FrontWall.stl |
| InnerWall.stl |
| RightWall.stl |
| Roof.stl |
| Roof1.stl |
| Roof2.stl |
| Slab.stl |
