Angled Foregrip with Integrated Light
I took and old afg file I had and adjusted it to house a flashlight. The light is actuated by a button that is in a natural position for the index finger. If you get it on the brightest setting then long press to turn off it returns to the brightest setting.
The light is a Lumintop Frog found here:
(Sorry for the affiliate link, it's my kid's. I'm trying to convince a 14 year old that his dad is still good for something. If you just search for lumintop frog you will find it too.)
It is quite bright for the size imo claiming 600 lumens, 443ft beam length, ipx-8 waterproof, and a long run time.
It is held in place by an M3x20mm nut and bolt that passes through the keychain hole. Once assembled, that thing isn't going anywhere. You do have to take the afg off to charge it but it is just two mloks. There are three holes but only to accommodate different handguards.
I printed in PLA+ with 5 walls and 30% infill and it seems fine.
It still needs finishing touches, it's not the cleanest design yet, but I'm not going to do that right now so here it is.
| AFG_Light_button.stl | 222.6KB | |
| main_body2.stl | 4.2MB | |
| top2.stl | 282.7KB |
