Angle Cutter For Exacto Knife- M3 Resized 3D Printer Model
The file 'Angle Cutter For Exacto Knife- M3 Resized 3D Printer Model' is (3mf,stl) file type, size is 6.1MB.
The file 'Angle Cutter For Exacto Knife- M3 Resized 3D Printer Model' is (3mf,stl) file type, size is 6.1MB.
I really liked the original Angle Cutter by JaredTS486, but I only had M3 bolts on hand and trying to secure a nut inside the slot proved a pain. So I eliminated the slot for the hex nut and re-sized the hole to 3.0 mm so M3 bolts thread into the plastic itself. I also countersunk the hole since M3 40-50 mm bolts typically only have the first half of the bolt threaded.
I printed this on my prusa mk3 with a 0.6 mm nozzle. The tolerance worked perfect for me, with just enough bite so you can still thread it by hand and remaining in place, though different printers may require different tolerances for the hole. I've posted both stl and 3mf files for each angle.
| angle_cutter_25-v2-3mf.3mf | 323.5KB | |
| angle_cutter_25-v2-stl.stl | 1.1MB | |
| angle_cutter_30-v2-3mf.3mf | 315.1KB | |
| angle_cutter_30-v2-stl.stl | 1.1MB | |
| angle_cutter_35-v2-3mf.3mf | 327.0KB | |
| angle_cutter_35-v2-stl.stl | 1.1MB | |
| angle_cutter_40-v2-3mf.3mf | 319.6KB | |
| angle_cutter_40-v2-stl.stl | 1.1MB | |
| angle_cutter_45-v2-3mf.3mf | 250.8KB | |
| angle_cutter_45-v2-stl.stl | 930.3KB | |
| angle_cutter_50-v2-3mf.3mf | 312.5KB | |
| angle_cutter_50-v2-stl.stl | 1.1MB | |
| angle_cutter_55-v2-3mf.3mf | 266.7KB | |
| angle_cutter_55-v2-stl.stl | 949.5KB | |
| angle_cutter_60-v2-3mf.3mf | 333.6KB | |
| angle_cutter_60-v2-stl.stl | 1.2MB | |
| angle_cutter_65-v2-3mf.3mf | 335.7KB | |
| angle_cutter_65-v2-stl.stl | 1.2MB |
