I've uploaded 2 types, a tabletop version and a hanging ornament version. Of those there are two versions each.. the default one, and one with thicker wings. If you are having layer adhesion problems with the thinner wings, try the thicker wings.
You should print this with 100% infill. The design is already hollow, with walls about 3mm thick...
| angel.stl | 203.8KB | |
| angelOrnament.stl | 260.0KB | |
| angelOrnamentThickWings.stl | 274.1KB | |
| angelThickWings.stl | 217.9KB |
