Anet E10/12 X Carriage MGHN12H E3D V6 3D Printer Model
The file 'Anet E10/12 X Carriage MGHN12H E3D V6 3D Printer Model' is (stl,stp) file type, size is 1.4MB.
The file 'Anet E10/12 X Carriage MGHN12H E3D V6 3D Printer Model' is (stl,stp) file type, size is 1.4MB.
Print the parts in PETG or ABS with 85% infill
Thinks you need:
ATTENSION: you must switch the pins on the "X" motor.
Look at the photo (Anet E10/12)
Please look for a Z endstop holder for your Printer
You can Use any fan for the E3D V6
Update: 20.09.2018
new: X+Z Umlenkung links for 25 mm V2
Update:
new tensioner for X and Y belt
| Hot_end_carriage_V6_Linear_25_mm.stl | 1.1MB | |
| Hot_end_carriage_V6_Linear_25_mm.stp | 353.1KB | |
| Hot_end_carriage_V6_locker.stl | 771.9KB | |
| Hot_end_carriage_V6_locker.stp | 135.9KB | |
| X+Z_Umlenkung_links_for_25_mm.stl | 1.0MB | |
| X+Z_Umlenkung_links_for_25_mm.stp | 272.5KB | |
| X+Z_Umlenkung_links_for_25_mm_V2.stl | 1.1MB | |
| X+Z_Umlenkung_links_for_25_mm_V2.stp | 278.0KB | |
| X_Riemenspanner.stl | 2.1MB | |
| X_Riemenspanner.stp | 826.3KB | |
| X_Spanner_innen.stl | 754.6KB | |
| X_Spanner_innen.stp | 113.1KB | |
| X_Spanner_linear_Umbau.stl | 373.2KB | |
| X_Y_Spanner_feder.stl | 2.6MB | |
| Y_Spanner_Feder.stl | 301.8KB |
