UPDATE 11/19/2018:
Designed a single, integrated piece that connects to the rear acrylic frame.
UPDATE 11/18/2018:
Connector pieces were corrected and replaced. Thank you to those that pointed it out.
UPDATE 8/26/2018:
Designed pieces that connect the back of the Y axis rods to the acrylic frame. The connectors help with alignment during installation, and are another contact point with the frame.
UPDATE 8/21/2018:
Redesigned the belt tensioner. Nut captivity added for idler bearing screw AND added spacers for the idler bearing. Part was also strengthened. Still uses M3 x 16mm screw.
This is a remix of Logan Royer's design for the Anet A8 (A6 won't work). Logan's original design:
https://www.myminifactory.com/object/anet-a8-prusa-style-y-axis-upgrade-50267
Strongly recommend:
Diagonal Reinforcement: https://www.thingiverse.com/thing:2351450
Top Reinforcement: https://www.thingiverse.com/thing:2646309
NEMA 17 stepper motor dampener: https://tinyurl.com/yalhohrr
| aneta8-prusa-rear-endstop-v1-1.stl | 221.3KB | |
| Integrated_Back_Left.stl | 90.3KB | |
| Integrated_Back_Right.stl | 90.3KB | |
| Left_Connector_v2.stl | 34.1KB | |
| Left_Corner_v1.stl | 77.2KB | |
| Right_Connector_v2.stl | 34.1KB | |
| Right_Corner_v1.stl | 77.4KB | |
| Y_Belt_Tensioner_v2.stl | 109.4KB | |
| Y_Motor_Bracket.stl | 72.2KB |
