Anet A8 – Front Frame Brace With Extra Support 3D Printer Model
The file 'Anet A8 – Front Frame Brace With Extra Support 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Anet A8 – Front Frame Brace With Extra Support 3D Printer Model' is (stl) file type, size is 1.2MB.
I really liked the original design by Puddlefist (https://www.thingiverse.com/thing:2397219), but since my Anet A8 is not supported on a rigid plane I decided to modify this project.
I have modified the front frame support so that I can add an extra support that I have designed that thanks to a screw it allows to adapt perfectly to the structure of the printer and provide additional rigidity to the printer itself.
I have also added a part on the front brace frame that allows it to fit under the printer frame.
UPDATE 07/07/2018
Since some users have had problems with the screw, I have added other screws with different lengths, compared to the original are all shorter, of -1, -2, -3 mm.
I suggest the use of the original, but for those who have problems can try with others.
Happy printing!
====================================================================
NOTE:
Make sure that your slicer program is set to 100% scale.
| Front_Brace.stl | 332.6KB | |
| Screw-1.0mm.stl | 509.5KB | |
| Screw-2.0mm.stl | 488.7KB | |
| Screw-3.0mm.stl | 468.1KB | |
| Screw.stl | 524.8KB | |
| Support.stl | 269.3KB |
