Anet A8 Electronics Case (mainboard, Octopi, Step-down Converter, Relay And Fan.) 3D Printer Model
The file 'Anet A8 Electronics Case (mainboard, Octopi, Step-down Converter, Relay And Fan.) 3D Printer Model' is (stl) file type, size is 508.1KB.
The file 'Anet A8 Electronics Case (mainboard, Octopi, Step-down Converter, Relay And Fan.) 3D Printer Model' is (stl) file type, size is 508.1KB.
This is a remix/overhaul of a previous case for the Anet A8. i have cleaned up the cases mounting and other areas. changed the cable opening and moved a bit of the mounting locations. i have added a step-down converter mount and mounting location under the raspberry pis mounting location. the arrow on this mount goes with the arrow on the converter. I have also added fan mounting and covers. one set will work with the fans included mounting screws with 2 attaching the fan to the case and 2 attaching the cover to the fan. the other set needed a M3x25mm screws to go from the cover to the case cover with the fan wedged between.
EDIT: V8 i have added a hole on the bottom right of the case (when its standing up) for the left z axis motors wires.
Components recommended:
Other Anet A8 Items:
| Anet_A8_Case_Bottom_V8.stl | 862.5KB | |
| Anet_A8_Case_Top.stl | 329.6KB | |
| Anet_A8_Case_Top_Fan_M3x25mm_Mounting.stl | 283.9KB | |
| Anet_A8_Case_Top_Icluded_Fan_Screw_Mounting.stl | 359.8KB | |
| Fan_Cover_2__M3x25mm_Mounting.stl | 142.8KB | |
| Fan_Cover_3__Icluded_Fan_Screw_Mounting.stl | 142.6KB | |
| Fan_Cover__M3x25mm_Mounting.stl | 121.9KB | |
| Step-Down_Converter_Mount.stl | 41.8KB |
