This is a new Selfmade E3D V6 X Carriage for the Original bearing blocks.
A Hesin Remix you finde here -> http://www.thingiverse.com/thing:2305368
2x M4x30 Screw
2x M4 Nut
3x M3x10 Screw
2x M3x20 Screw
5x M3 Nut
12x Bearing Block Screw
define X_MAX_POS 250
define X_MIN_POS -13
define Y_MAX_POS 220
define Y_MIN_POS -13
define Z_MAX_POS 250
define Z_MIN_POS 0
define X_PROBE_OFFSET_FROM_EXTRUDER -25
define Y_PROBE_OFFSET_FROM_EXTRUDER 5
define Z_PROBE_OFFSET_FROM_EXTRUDER 0
define LEFT_PROBE_BED_POSITION 27
define RIGHT_PROBE_BED_POSITION 205
define BACK_PROBE_BED_POSITION 200
define FRONT_PROBE_BED_POSITION 20
04.04.2017
New Design V4
-include Selfmade Chain (without grind to fit)
30.04.2017
Dual 40mm Fanduc
to all who want to ask, no the fusion360 date is not free.
| E3DV6_12mm_Sensor_V4.stl | 84.4KB | |
| E3DV6_18mm_Sensor_V4.stl | 90.8KB | |
| E3DV6_8mm_Sensor_V4.stl | 79.1KB | |
| E3DV6_AnetStock_Sensor_V4.stl | 68.9KB | |
| E3DV6_BasePlate_V4.stl | 386.2KB | |
| E3DV6_Beltholder_V4.stl | 463.6KB | |
| E3DV6_BLTouch_Sensor_V4.1.stl | 96.4KB | |
| E3DV6_Chain_Closed_Full_V4.stl | 7.4MB | |
| E3DV6_Chain_Open_Full_V4.stl | 7.4MB | |
| E3DV6_Chain_Stepper_Mount_Cover_V4.stl | 4.8KB | |
| E3DV6_Chain_Stepper_Mount_V4.stl | 221.9KB | |
| E3DV6_Closed_Chain_Long_Solo_V4.stl | 194.8KB | |
| E3DV6_Closed_Chain_Short_Solo_V4.stl | 463.0KB | |
| E3DV6_Coldend_40mmFan_holder_V2.stl | 1.1MB | |
| E3DV6_dual_40mm_fanduc.stl | 3.2MB | |
| E3DV6_E3DHolder_without_Chain_V4.stl | 141.1KB | |
| E3DV6_E3DHolder_with_Chain_V4.stl | 238.4KB | |
| E3DV6_Open_Chain_Clip_Full_V4.stl | 83.1KB | |
| E3DV6_Open_Chain_Clip_Solo_V4.stl | 3.4KB | |
| E3DV6_Open_Chain_Long_Solo_V4.stl | 195.4KB | |
| E3DV6_Open_Chain_Short_Solo_V4.stl | 463.2KB | |
| Sensorhalter_18mm180flip.stl | 45.6KB |
