Anet A6 – Frankenstein (E3D V6 / Volcano) 3D Printer Model
The file 'Anet A6 – Frankenstein (E3D V6 / Volcano) 3D Printer Model' is (STL,stl) file type, size is 6.7MB.
The file 'Anet A6 – Frankenstein (E3D V6 / Volcano) 3D Printer Model' is (STL,stl) file type, size is 6.7MB.
It's a live! My monster, called like Frankenstein ((=
All what you need is only E3Dv6 standard extruder with his fan. Second fan and bearings you already have in original Anet A6 extruder.
Required bowden filament feeder. If you have PTFE tube and fittings, you no need to buy anything more, all can be made from original Anet A6 extruder.
This carriage allowing to use basic e3d v6 hot end block and volcano hot end block. You can set different height by moving central part (radiator holder).
Two sides cooling provide better quality of print. Large air flow channels. Cooling of radiator of extruder, also made with flow simulations, and has correct flow path.
Fast and easy belt tension. Connection without screeds.
Some links I used:
E3D v6 kit (with volcano), PTFE tube, 40mm fan, GT2 belt, linear bearings (or use olds from Anet).
| 10_x_axis_sensor.STL | 870.4KB | |
| 11_fan_grill_40.STL | 2.3MB | |
| 12_fan_grill_30.STL | 2.8MB | |
| 1_carriage_part1.STL | 580.9KB | |
| 2_carriage_part2.STL | 584.8KB | |
| 3_carriage_part3.STL | 572.0KB | |
| 4_carriage_part4.STL | 571.7KB | |
| 5_target_cooling_fan_split.stl | 2.7MB | |
| 5_target_cooling_fan_whole.STL | 2.2MB | |
| 6_extruder_cooling_fan.STL | 1.3MB | |
| 7_extruder_lock.STL | 1.8MB | |
| 8_belt_locks.STL | 72.3KB | |
| 9_nozzles_cooling_fan.STL | 1.1MB |
