This proyect transforms the Anet A6 into a Cube type 3d printer. Is very easy and the final result is amaising.
The proyect is almost finish, but it still needs some sthetic details, like the mainborad box or some other things.
YOU WILL NEED:
Frame:
T-Slot 2020 Aluminium Extrusion Profiles
4 x 420mm
6 x 380mm
6 x 350mm
Fixings:
56pcs Aluminium Corner Brackets
112pcs x M5 x 8mm button head screws (for corner brackets)
25pcs x M5 x 10mm button head screws (for plastic parts)
4pcs x M5 x 15mm button head screws (for plastic parts)
141pcs T-Slot M5 hammer nuts
Printing parts:
2 x Z_Motor_Support_1
2 x Z_Shaft_Clamp_2 (down)
2 x Z_Shaft_Clamp_3 (up)
1 x Y_Motor_Support_2
4 x Y_Shaft_Clamp_3
1 x Y_Belt_Tensioners_1_2
1 x Y_Belt_Tensioners_2_2
1 x Y_Endstop_Support_2
Print settings:
3 Perimeters
3 top/bottom layers
0.20mm layer height (or better)
50% infill
PET-G
02/02/2017 Display Holder update.
13/02/2017 X Axis redesign. http://www.thingiverse.com/thing:2106854
15/02/2017 Power Supply Supports update.
12/06/2017 Filament Roller update for 608 ball bearings
22/01/2019 Aded Z_Shaft_Clamp_3 for 608 ball bearing
| Anet_Evolution.stp | 7.7MB | |
| Display_Holder_Back.stl | 250.0KB | |
| Display_Holder_Front.stl | 1.1MB | |
| Filament_Roller_Body.stl | 1.0MB | |
| Filament_Roller_Clip.stl | 222.5KB | |
| Power_Supply_Support.stl | 240.3KB | |
| Power_Supply_Support_2.stl | 763.6KB | |
| Y_Belt_Tensioners_1_2.stl | 258.4KB | |
| Y_Belt_Tensioners_2_2.stl | 679.1KB | |
| Y_Endstop_Support_2.stl | 237.4KB | |
| Y_Motor_Support_2.stl | 968.9KB | |
| Y_Shaft_Clamp_3.stl | 766.2KB | |
| Z_Motor_Support_1.stl | 1.4MB | |
| Z_Shaft_Clamp_2.stl | 646.5KB | |
| Z_Shaft_Clamp_3.stl.STL | 78.6KB |
