Anet A6 Cable Holder X Wagon 3D Printer Model
The file 'Anet A6 Cable Holder X Wagon 3D Printer Model' is (zip,stl) file type, size is 3.2MB.
The file 'Anet A6 Cable Holder X Wagon 3D Printer Model' is (zip,stl) file type, size is 3.2MB.
A simple way to hold the cables for the x wagon :-)
One of the problems with the Anet A6 printer is that the cable
to the X wagon gets stuck with higher prints.
This is my simple solution for that :-)
I recommend to use metal spacers between the moving parts
later:
It came to my understanding that some people want to use a fan
so i made some extra parts to make this possible again
Now there are 3 possibilities:
1: no fan with the original setup
2: for my J-Hotend mod
3: for a fan with the original hotendsetup
also see pictures :-)
Blue PET-G one is the original setup without fan.
Black ABS one is the J-Hotend setup.
Silver ABS one is the original setup with fan
I also put the files per set up in a ZIP file to make it easier :-)
later:
I have made an additional part for this holder. See :https://www.thingiverse.com/thing:2343666
PS: I know the word Cable is spelled wrong in the file names ;-) to long nights i Guess :-)
in my language it's "kabel" :-)
PS2:
you may want to install also:
https://www.thingiverse.com/thing:2529991
| A6_kable_holder_FOR_J-HOTENDmod.zip | 790.0KB | |
| A6_kable_holder_NO_FAN.zip | 909.6KB | |
| A6_kable_holder_WITH_FAN.zip | 905.5KB | |
| A6_kable_holder_x_wagen1.stl | 772.5KB | |
| A6_kable_holder_x_wagen1_with_fan.stl | 716.0KB | |
| A6_kable_holder_x_wagen2.stl | 989.2KB | |
| A6_kable_holder_x_wagen3.stl | 871.1KB | |
| A6_kable_holder_x_wagen4.stl | 945.3KB | |
| A6_kable_holder_x_wagen4_for_hotendmod.stl | 559.8KB | |
| A6_kable_holder_x_wagen4_for_hotendmod_spacer.stl | 369.9KB | |
| A6_kable_holder_x_wagen4_with_fan.stl | 1.0MB |
